| 7210A5TRDUMP3 NSK Super Precision Bearings | H1:76.2 mm; Initial grease fill:107.73 g; Max. speed for Taconite seal:1800 r/min; Da:110 mm; Housing:SAF 610; P180°:15.6 kN; L:269.875 mm; Appropriate attachment bolt size G:0.625 in; P150°:12.9 kN; Cap bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:8; RG:1/8 NPT; A2:190.5 mm; R1:42.862 mm; N1:19.05 mm; PG:1/8 NPT; Mass pillow block:10 kg; da:44.45 mm; H2:28.575 mm; P120°:14.2 kN; |
| 7212CTYNSULP4 NSK Super Precision Bearings | Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:143000 N; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Basic Dynamic Radial Load Rating C:134000 N; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Two Seals & Snap-Rin; B:57.20 mm; Fillet Radius ra:2.00 mm; |
| 7009A5TRQUMP3 NSK Super Precision Bearings | Fillet Radius ra:2.50 mm; B:43.00 mm; Basic Dynamic Radial Load Rating C:157000 N; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:2800 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; d:90.000 mm; Basic Static Radial Load Rating Co:160000 N; D:190.0000 mm; |
| 7012CSN24TRDULP3 NSK Super Precision Bearings | d:85.000 mm; Grease Speed Rating n1:2900 rpm; D:210.0000 mm; Fillet Radius ra:3.00 mm; B:52.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:186000 N; Basic Dynamic Radial Load Rating C:203000 N; |
| 7012CTRDUMP3 NSK Super Precision Bearings | B:4.763 mm; L:304.8 mm; A1:64.287 mm; A2:45.237 mm; A3:47.625 mm; Mass locking plate:0.79 kg; Hexagonal head bolts:2 x 3/4-10x1-1/2; |
| 7911A5TRSUMP3 NSK Super Precision Bearings | d:50.000 mm; Basic Static Radial Load Rating Co:11800 N; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Dynamic Radial Load Rating C:14600 N; Oil Speed Rating Open/Shielded n2:10000 rpm; B:12.00 mm; Sealed Speed Rating n3:5600 rpm; D:72.0000 mm; Fillet Radius ra:0.64 mm; Accessories:One Seal; |
| 7013CTRDULP3 NSK Super Precision Bearings | ra max.:2 mm; Basic dynamic load rating C:540 kN; D1 ≈:953 mm; Mass bearing (including seat washer where applicable):52 kg; r1,2 min.:2 mm; Limiting speed:670 r/min; H:63 mm; Minimum load factor A:140; Reference speed:480 r/min; d1 ≈:1027 mm; d:950 mm; Da max.:982 mm; Fatigue load limit Pu:60 kN; D:1080 mm; da min.:998 mm; Basic static load rating C0:5100 kN; |
| 7213CTRDUMP3 NSK Super Precision Bearings | Pa:68.5 kN; Bearing limiting speed:1800 r/min; Initial grease fill:1672.65 g; P120°:107 kN; A1:190.5 mm; da:176.213 mm; P180°:113 kN; P90°:173 kN; A2:273.05 mm; P150°:94.3 kN; ba:92.869 mm; Stabilizing ring:SR-38-32; Housing:SAW 538; End plug (suffix Y):EPR 21; h:63.5 mm; J1:114.3 mm; N1:34.925 mm; Ca:129.819 mm; Cap bolt recommended tightening torque:271.2 N·m; H:401.637 mm; |
| 7211A5TRSUMP3 NSK Super Precision Bearings | Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:741000 N; D:400.0000 mm; d:220.000 mm; B:130.00 mm; Grease Speed Rating n1:1200 rpm; Basic Static Radial Load Rating Co:1320000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1400 rpm; |
| 7013A5TRDUMP3 NSK Super Precision Bearings | da:85 mm; J6:378 mm; Oil level, min.:41 mm; Oil seal:2 x TSN 619 U; Cap bolt, rec. tightening torque:200 N·m; H1:125 mm; N4 max.:8 mm; N1:18 mm; Housing:FSNL 522-619 RU; H:242 mm; Cap bolt, size:M 20x100; L:410 mm; P180°:340 kN; A1:120 mm; J:350 mm; P0°:600 kN; H2:45 mm; J1:70 mm; Locating ring:2 x FRB 17,5/200; Mass housing:22 kg; |
| 7912A5TRDULP3 NSK Super Precision Bearings | Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4000 rpm; Basic Static Radial Load Rating Co:64000 N; Sealed Speed Rating n3:4000 rpm; Basic Dynamic Radial Load Rating C:85200 N; Accessories:One Seal; D:110.0000 mm; d:50.000 mm; B:47.60 mm; Oil Speed Rating n2:5300 rpm; |
| 7009A5TRDUMP3 NSK Super Precision Bearings | Taconite seal (dc shaft position):TER 188; Housing:SAF 317; R1:66.675 mm; A2:235.744 mm; Max. speed for Taconite seal:775 r/min; Cap bolt:2 x 3/4-10 UNC; Appropriate attachment bolt size G:0.875 in; H2:44.45 mm; P60°:94.3 kN; Taconite seal (db shaft position):TER 109; L:387.35 mm; P120°:35.6 kN; J max.:333.375 mm; Da:180 mm; RG:3/8 NPT; S:4.763 mm; Stabilizing ring:SR-20-17; P180°:38.3 kN; |